Preface
If you have data security concerns, this document helps you to sanitize or remove
memory devices from the DPO2000 and MSO2000 Series Digital Phosphor and
Mixed Signal
Oscilloscopes.
The DPO2000 and MSO2000 series products have data storage (memory) devices
and data out
put devices (USB ports). These instructions tell you how to clear or
sanitize the memory devices, and also tell you how to declassify an instrument
that is not functioning.
Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flashmemoryor
on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
Products
The following Tektronix products a re covered by this document:
DPO20
24
DPO2014
DPO2012
MSO2024
MSO2014
MSO2012
Related Documents
The DPO2000 and MSO2000 Series Digital Phosphor and Mixed Signal
Os
cilloscopes Service Manual, part number 071-2331-XX, is available on the
Tektronix Web site at www.tektronix.com/manuals.
DPO2000 and MSO2000 Series Declassification and Security Instructions iii
To Next Page
Loading...
Need help?
General
