Tektronix DPO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Examples
ETHERNET:NAME
“labscope1” sets the oscilloscope's network name.
ETHERnet:PASSWord
Sets or returns the HTTP Ethernet access password. If a password is set, the user
must enter the password before the user's Web browser can access the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:PASSWord <new>
ETHERnet:PASSWord?
Arguments
<new> is a new password, enclosed in quotes.
Examples
ETHERNET:PASSWORD ”ZEN53” replaces the c urrent Ethernet password with the
new password ZEN53.
ETHERNET:PASSWORD? might return :ETHERNET:PASSWORD “ZEN53”.
ETHERnet:PING (No Query Form)
Causes the oscilloscope to ping the gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING EXECute
Examples
ETHERNET:PING EXECUTE causes the oscilloscope to ping the gateway IP
address.
ETHERnet:PING:STATUS? (Query Only)
Returns the results from sending the ETHERnet:PING command to ping the
gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING:STATUS?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-151

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English