• Yellow – standby mode
• Green – powered on
Power off the instrument
Procedure
1. Press the front-panel power button to shut down the instrument.
Note: If powering off a multi-instrument configuration, power off the master first.
The shutdown process takes approximately 30 seconds to complete, placing the instrument in standby mode. Alternatively, use the
Windows Shutdown menu.
Note: You can force an immediate shutdown by pressing and holding the power button for four seconds. Unsaved data is lost.
2. To completely remove power to the instrument, perform the shutdown just described, and then remove the power cord from the
instrument.
Front-panel connectors
Power off the instrument
9
To Next Page
Loading...
Need help?
General
