Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
Returns
<NR1> isadecim
al integer ranging from 0 through 255. The binary bits of the
specified channel's operation enable register are set according to this value.
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle
This command is used to modify or query the operation enable register of a
channel, where <x> is 1, 2, or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively.
Only1and2areavailableontwochannelinstruments. (Seepage3-1,Status
and Events
.)
Group
Status
Syntax
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle?
Arguments
<mask>::=<NR1>
where
<NR1> is a decimal integer ranging from 0 through 255. The binary bits of the
OENR are set according to this value.
register
Examples
STAT:OPER:INST:ISUM2:ENABle 2
STAT:OPER:INST:ISUM2:ENAB
le?
might return 2, which would indicate that
only the Constant Current bit of the Operation Enable Register for channel 2
would affect the OPER bit of the Status Byte Register.
STATus:OPERation:INSTrument:ISUmmary<x>[:EVENt]? (Query Only)
This queries the operation event register summary of a cha
nnel, where <x> is 1, 2,
or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively. Only 1 and 2 are available
on two channel instruments.(See page 3-1, Status and Events.)
Group
Status
Syntax
STATus:OPERation:INSTrument:ISUmmary<x>[:EVENt]?
Returns
<NR1> isadecima
l integer representation of the contents of the Operation Event
Register (OEVR) for the s pecified channel, ranging from 0 to 255.
2-40 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English