Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
STATus:QUEST
ionable:INSTrument:ISUMmary<x>:[EVENt]? (Query Only)
This queries the operation event register of summary of a channe l, where <x> is 1,
2, or 3. 1, 2, and 3 are channel 1, 2, and 3 , respectively. Only 1 and 2 are available
on two channe
l instruments. (See page 3-1, Status and Events.)
Group
Status
Syntax
STATus:QUESTionable:INSTrument:ISUMmary<x>:[EVENt]?
Returns
<NR1> is a decimal integer represen
tation of the contents of the Questionable
Event Register for the specified channel, ranging from 0 to 255.
Examples
STATUS:QUESTIONABLE:INSTRUMENT:ISUMMARY3:EVENT? might return 2,
indicating that channel 3 transitioned
to constant current mode.
*STB? (Query Only)
The byte query returns the contents of the Status Byte Register (SBR) using the
Master Summary Status (MSS) bit. Refer to the Status and Events chapter for
more information. (See page 3-3.)
Group
Status
Syntax
*STB?
Related Commands
*ESE, *CLS, *ESR?
Returns
<NR1>
Examples
*STB? 96
shows that the SBR contains the binary value 01100000.
SYSTem:ERRor? (Query Only)
This command queries the e rror code and error information of the pow
er supply
and returns both values. (See Table 3-10 on page 3-10.)
2-44 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English