2: Front-panel overview Model 2470 High Voltage SourceMeter Instrument
2-10 2470-900-01 Rev. B / August 2019
Menu overview
To access the main menu, press the MENU key on the 2470 front panel. The figure below shows the
organization of the main menu.
Figure 10: 2470 main menu
The main menu includes submenus that are labeled in green across the top of the display. Selecting
an option in a submenu opens an interactive screen.
Store measurements on a USB flash drive
If there is measurement data in the buffer, you can copy it from the 2470 to a USB flash drive. The
information is saved in the CSV file format.
To store measurement data:
1. Insert a flash drive into the front-panel USB port.
2. Press the MENU key.
3. In the Measure column, select Reading Buffers.
4. Select the buffer that you want to save.
5. Select Save to USB.
6. On the File Content dialog box, make selections as needed for your data set. You can press
HELP to get information about each option.
7. Select OK.
To Next Page
Loading...
Need help?
General
