Tektronix MDO32 Declassification And Security Instructions

Clear or sanitize a non-functional instrument
Use the following procedures to clear or sanitize a non-functional instrument.
Acquisition board
Only qualified personnel should perform service procedures. Read the General
Safety Summary and the Service Safety Summary in the 3-Series MDO Service
Manual (Tektronix part number, 077-1500-xx) before performing any service
procedures.
Remove the Acquisition board and return the product to Tektronix. A new
Acquisition board will be installed and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refer to the service manual available on the Tektronix
Web site at www.tektronix.com/manuals.
After removing the Acquisition board, refer to your company's internal policies
regarding handling or disposal of the board.
USB flash drive
Remove the USB flash drive and return the instrument to Tektronix for repair.
After removing the USB flash drive, refer to your company's internal policies
regarding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at the
time of replacement.
3 Series MDO Declassification and Security Instructions 13

Tektronix MDO32 Specifications

General

Brand	Tektronix
Model	MDO32
Category	Test Equipment
Language	English