Tektronix MDO4104-3 Instructions

Clear and Sanitize Procedures
Table 2: Nonvol
atile memory devices
Type and
minimum size Function
Type
of
user
info
stored
Method
of
modification
Data input
method Location
User
accessible To clear To sanitize
IC, Memory;
CMOS,
EEPROM; 256
bits x 8, 2048 bits,
Serial; 24C0
2,
SO8.15
Contains
PowerPC
hardware
configuration
None Indirect
System
Main
acquisition
board
No Not applicable -
no user data or
settings
Not applicable -
no user data or
settings
CMOS, FLASH
;
C, 512 Mb,
150 NS, 3 V,
StrataFla
sh;
PC48F4400P0TB00A,
BGA64
Contains
the
instrument
firmware,
calibration
constants,
reference
waveforms,
instrument
setups,
and
protected
user dat
a
(PUD)
Both Indirect Front panel
control and
oscilloscope
input channels.
Data input
s
through USB
port and
Ethernet
port.
Main
acquisitio
n
board
User can
access
only the
reference
part;
not the
program
Not applicable
for calibra
tion
constants.
Use TekSecure
to clear re
ference
waveforms
and instrument
setups.
(See page 7.)
You can disable
the LAN E
thernet
and clear
information, such
as IP add
resses.
(See page 9.)
You can disable
the USB
Device
port. (See
page 10.)
You ca
n
overwrite
protected user
data
(PUD). (See
page 8.)
Not applicable
for calibra
tion
constants.
Use TekSecure to
clear refe
rence
waveforms
and instrument
setups.
(See page 7.)
You can disable
the LAN E
thernet
and clear
information, such
as IP add
resses.
(See page 9.)
You can disable
the USB
Device
port. (See
page 10.)
You ca
noverwrite
protected user
data (PUD). (See
page
8.)
Table 3: Nonvolatile memory devices – Application Modules
Module
Type and
minimum size Function
Type
of user
info
stored
Method of
modification
Data input
method
User
accessible To sanitize
DPO
4AERO,
DPO4AUDIO,
DPO4AUTO,
DPO
4AUTOMAX,
DPO4COMP
DPO4LMT,
DP
O4ENET,
DPO4PWR,
DPO4USB,
D
PO4VID,
FPGAView
MDO4TRIG
S
IGEXPTE
IC,
MEMORY;
CMOS, EEPROM;
256 bits X 8, 2048
bit
s; SERIAL; 24C02,
SO8.15
Opt
ion key
None Indirect
Sys
tem
No
Ref
er to the
procedure, Sanitizing
an Application
Mod
ule.(See
page 5.)
MDO4000 Series Oscilloscopes and Application Modules Decla ssification and Security Instructions 3

Tektronix MDO4104-3 Specifications

General

Brand	Tektronix
Model	MDO4104-3
Category	Test Equipment
Language	English