Important safety information
The measuring terminals on this product are not rated for connection to
mains or Category II, III, or IV circuits.
Do not operate withou t covers. Do not op erate this product with cov ers
or panels removed, or with the case open.
Avoid exposed circuitry. Do not touch ex posed connections and
components when power is present.
Do not operate with suspected failures. If you suspect that there i s damage
to this product, ha ve it inspected by qualified service personnel.
Disable the produ ct if it is damaged. Do not use the p ro duct if it is
damaged or operates incorrectly. If in doubt about safety of the product,
turn it off and disconnect the power. Clearly mark the produ ct to prev
ent
its further operation.
Examine the exterior of the product before you use it. Look fo r cracks
or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions. Be aware that condensation may
occurifaunitismovedfromacold to a warm environment.
Do not operate in an e xplosive atmosphere.
Keep product surfa ces clean and dry.
Remove the input signals before
you clean the product.
Provide proper ventilation. Refer to the instal lati on instr uct ions in the
manual for details on installing the product so it has proper ventilation.
Provide a safe working environment. Avoid improp e r or prolonged use of
keyboards, pointers, and butto n pads. Improper or prolonged keyboard
or pointer use may result in serious injury.
Be sur
e your work area meets applicable ergonomic standards. Consult
with an ergonomics professional to avoid stress injuries.
Use only the Tektronix rackmount hardware specifi ed for this product.
RSA306 Install a tio n and Safety Instruction s iii
To Next Page
Loading...
Need help?
General
