Tektronix RSA5106B Declassification And Security Instructions

Preface
This document helps customers with data security concerns to sanitize or remove memory devices from the RSA5100B
Series Real-Time Signal Analyzers.
These products have data storage (memory) devices and data output devices (USB ports). These instructions tell how to
clear or sanitize the memory devices and disable the data output devices. The instructions also tell how to declassify an
instrument that is not functioning.
Reference
The procedures in this document are written to m eet the requirements specified in:
NISPOM, DoD 5220.22–M, Chapter 8
ISFO Process Manual for Certification & Accreditation of Classified Systems under NISPOM
Products
The following Tektronix products are covered by this document:
RSA5103B
RSA5106B
RSA5115B
RSA5126B
Terms
The following terms may be used in this document:
Clear.
This removes data on media/memory before reusing it in a secured area. All reusable memory is cleared to
deny access to previously stored information by standard means of access.
Erase.
This is equivalent to clear.
Instrument Declassification.
A term that refers to procedures that must be undertaken before an instrument is
removed from a secure environment. Declassification procedures include memory sanitization and memory removal,
and sometimes both.
RSA5100B Series Declassification and Security Instructions iii

Tektronix RSA5106B Specifications

General

Brand	Tektronix
Model	RSA5106B
Category	Measuring Instruments
Language	English