Tektronix TDS 520B Service Manual

Specifications
TDS 500B, 600B and TDS 700A Service Manual
1–3
Besides these channels, up to three math waveforms and four reference wave-
forms are available for display. (A math waveform results when you specify dual
waveform operations, such as add, on any two channels. A reference waveform
results when you save a waveform in a reference memory.)
Horizontal System
There are three horizontal display modes: main only, main intensified, and
delayed only. You can select among various horizontal record length settings.
A feature called “Fit to Screen” allows you to view entire waveform records
within the 10 division screen area. Waveforms are compressed to fit on the
screen. See Table 1–2.
Table 1–2: Record Length vs. Divisions per Record, Samples per Division and
Sec/Div Sequence
Rec rd e g h
Divisions per Record
Rec rd e g h
Sample/Division (Sec/Div Sequence)
Rec
o
rd
L
e
n
g
t
h
Fit to Screen OFF
50 (1–2–5)
Fit to Screen ON
(Sample/Div & Sec/Div
Sequence varies)
500 10 divs 10 divs
1000 20 divs 10 divs
2500 50 divs 10 divs
5000 100 divs 10 divs
15000 300 divs 15 divs
50000 (TDS 500B/700A only) 1,000 divs 10 divs
75000
(TDS 500B/700A opt. 1M only)
1,500 divs 15 divs
100000
(TDS 500B/700A opt. 1M only)
2,000 divs 10 divs
130000
(TDS 500B/700A opt. 1M only)
(for TDS 520B & 724A, 1 or 2
channels only)
2,600 divs 13 divs
250000
(TDS 520B/724A opt. 1M only,
1 channel,
TDS 540B, 744A, 784A opt. 1M
only, 1 or 2 channels))
5,000 divs 10 divs
500000 (TDS 540B, 744A, 784A
opt. 1M only, 1 channel)
10,000 divs 10 divs

Tektronix TDS 520B Specifications

General

Brand	Tektronix
Model	TDS 520B
Category	Test Equipment
Language	English