EasyManuals Logo
Home>Tektronix>Test Equipment>TDS 520B

Tektronix TDS 520B Service Manual

Tektronix TDS 520B
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Nominal Traits
1–12
TDS 500B, 600B and TDS 700A Service Manual
Table 1–6: Nominal Traits — Display System
Name Description
Video Display 7 inch diagonal, with a display area of 5.04 inches horizontally by 3.78 inches vertically
TDS 520B, 540B, 620B, 680B: Monochrome display
TDS 644B, 684B, 724A, 744A, 784A: Color display
Video Display Resolution 640 pixels horizontally by 480 pixels vertically
Waveform Display Graticule Single Graticule: 401 × 501 pixels, 8 ×10 divisions, where divisions are 1 cm by 1 cm
Waveform Display Levels/Colors TDS 520B, 540B, 620B & 680B: Sixteen levels in infinite-persistence or variable
persistence display
TDS 644B, 684B, 724A, 744A, 784A: Sixteen colors in infinite-persistence or variable
persistence display
Table 1–7: Nominal Traits — GPIB Interface, Output Ports, and Power Fuse
Name Description
Interface, GPIB GPIB interface complies with IEEE Std 488-1987
Interface, RS-232 RS-232 interface complies with EIA/TIA 574 (talk only)
Optional on the TDS 520B and 540B
Interface, Centronics Centronics interface complies with Centronics interface standard C332-44 Feb 1977,
REV A
Interface, Video VGA video output with levels that comply with EIA RS 343A standard. DB-15 connector
Logic Polarity for Main- and Delayed-
Trigger Outputs
Negative TRUE. High to low transition indicates the trigger occurred.
Fuse Rating Either of two fuses
1
may be used: a 0.25I × 1.25I (UL 198.6, 3AG): 6 A FAST, 250 V or
a 5 mm × 20 mm (IEC 127): 5 A (T), 250 V.
1
Each fuse type requires its own fuse cap.
Table 1–8: Nominal Traits — Data Handling and Reliability
Name Description
Time, Data-Retention, Nonvolatile
Memory
1
,
2
Battery life 5 years
Floppy disk,
(optional on the TDS 520B and 540B)
3.5 inch, 720 K or 1.44 Mbyte, DOS 3.3-or-later compatible
1
The times that reference waveforms, stored setups, and calibration constants are retained.
2
Data is maintained by small lithium-thionyl-chloride batteries internal to the memory ICs. The amount of lithium is so
small in these ICs that they can typically be safely disposed of with ordinary garbage in a sanitary landfill.

Table of Contents

Other manuals for Tektronix TDS 520B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix TDS 520B and is the answer not in the manual?

Tektronix TDS 520B Specifications

General IconGeneral
BrandTektronix
ModelTDS 520B
CategoryTest Equipment
LanguageEnglish

Related product manuals