Preface
This service manual provides inform ation to verify p erform ance of,
calibrate, troubleshoot, disassemble, and replace parts on the TDS2000C and
TDS1000C-ED
U Series Digital Storage Oscilloscopes.
Unless noted otherwise, the term "oscilloscope" refers to all models in the
TDS2000C an
d TDS1000C-EDU series.
Manual Conventions
This manu
al uses certain conventions that you should become familiar with
before attempting s ervice.
Modules
Throughout this m anual, any replaceable component, assembly, or part is referred
to by the
term module.
A module is composed of electrical and mechanical assemblies, circuit cards,
interc
onnecting cables, and user-accessible controls.
Replaceable Parts
This manual refers to any field-replaceable assembly or me chanica l part
specifically by its name or generica lly as a replaceable part. In general, a
repl
aceable part is any circuit board or assembly, such as the hard disk drive, or a
mechanical part, such as the I/O port connectors, that is listed in the replaceable
parts list.
Safety
Sym
bolsandtermsrelatedtosafetyappearintheServiceSafetySummaryfound
at the beginning of this manual.
Related Documentation
To read about Use these documents
I
nstallation and
Operation
T
he oscilloscope user manual, available on the Tektronix Web
site.Go to www.tektronix.com/manuals and search for the user
manual for your product (available in 11 languages).
Programmer
Commands
The oscilloscope programmer manual, available on the Tektronix
Web site. Go to www.tektronix.com/manuals and search for the
programmer manual for your product.
TDS2000C and TDS1000C-EDU Series Oscilloscope Service Manual ix
To Next Page
Loading...
Need help?
General
