Teldat WWAN Enabler User Manual

Fig. 5: Front Panel, side view
3.2.2 Wall mounting
The WWAN Enabler can be mounted on the wall.
There are two slots on the underside of the device, used to fix it to the wall. You can see this in Underside Panel on
page 8.
We recommend the following accessories for wall mounting, valid for solid and Gypsum board (plaster) walls:
• 2 screws: [3.5x30 coach screw with a 90-degree head angle].
Fig. 6: Screw
• 2 wall anchors: [8mm diameter white ribbed wall anchor].
Fig. 7: Wall anchor
Warning
The screws must go into a wall stud (wood) or a wall anchor of the appropriate type for the wall. Screws
into drywall are not strong enough to mount the device.
There are two slots on the underside of the device that can be used to fix it to the wall. You can see this in the follow-
ing figure:
3 Components and Power Supply Teldat S.A.
10 WWAN Enabler

Teldat WWAN Enabler Specifications

General

Brand	Teldat
Model	WWAN Enabler
Category	Network Router
Language	English