Telecom Behnke 20-0001A-IP User Manual

69www.behnke-online.de
GB
Instructions for Behnke SIP 2.0
Technical Specifications
Safety and administration
▸
Password protection for admin access
▸
Administration via web browser
Physical connections
▸
RJ45-Port for 100baseT Ethernet, alternatively
via screw terminal
▸
Screw terminals for relay contacting
Electric characteristics
▸
Power supply via Power over Ethernet (PoE
according to IEEE 802.3af)
▸
Max. power consumption: 12 W
▸
SIP intercom station: 5 W
▸
Device on PORT2: 7W max.
▸
For SPL stations POE-Plus
IEEE802.03 at-2009
Max. Power consumption:
•
SIP intercom station 5 W
•
Amplifier 15 W
Port 2 must not be used
▸
Max switching power of relays:
max. switching voltage: 60VDC/50VAC
max. switching current: 2A
max. switching power: 62,5VA/60W
Please note that none of the above specifica-
tions may be exceeded
▸
Input voltage alarm input:
5VDC - 24VDC
▸
Operating temperature: -20° C to +50° C
▸
TNV-1: For TNV-1 circuits, the SIP intercom
station must be grounded via the
GND connection, cf. chapter 2.3. Connections,
earthing
▸
EMC: EN55022 A/B, EN55024
▸
Safety: EN60950
Features of the series 5 / 10 IP camera
RTSP stream
rtsp://<user name>:<password>@<IP address of the
Behnke IP camera>:8557(Port)/video.mp4
User name: admin (alternatively: viewer)
Password: admin (alternatively: viewer)
HTTP stream
http://<user name>:<password>@<IP address of the
Behnke IP camera>/bha-api/video.cgi
User name: admin (alternatively: viewer)
Password: admin (alternatively: viewer)
Single image query (JPEG)
http://<user name>:<password>@<IP address of the
Behnke IP camera>/bha-api/image.cgi
User name: admin (alternatively: viewer)
Password: admin (alternatively: viewer)
Behnke IP cameras in 5/10 series SIP intercom
stations require a DHCP server
Series 20, 30 and 50 IP
▸
Modular setup
▸
Up to 8 direct call buttons with freely configur-
able telephone numbers
▸
2 freely configurable relays
▸
Optional safety relay for remote mounting
available
▸
Keypad module available, functions:
•
Direct dialling of telephone numbers
•
Codelock
•
Speed dial with up to 100 target numbers
▸
Display module available, functions:
▸
Illuminated
▸
4-line-display with up to 20 characters each
▸
Info texts depending on the device status,
configurable
▸
199 telephone book entries, more upon request
▸
Multikey with up to 100 call buttons upon
request

Telecom Behnke 20-0001A-IP Specifications

General

Brand	Telecom Behnke
Model	20-0001A-IP
Category	Intercom System
Language	English