It is very important to use screws and / or other materials, which are working
together with the materials of the wall.
The stove has a weight of approx. 100 kg.
Ask your Hetas installer or your stove dealer, if you have further questions
about security and local rules.
If the TT1W has to be mounted on a wall, you have to make sure, that
you keep a distance of at least 325mm between floor and stove.
2. LIGHTING INSTRUCTION
The first time:
The first time the stove is lit is must be done gently as all the materials need
to get use to the heat. The Senotherm varnish that the stove is painted with
will harden the first couple of times the stove is heated, and it may cause
some odour nuisances. So make sure that you have proper ventilation. Do not
touch the painted surface, when the stove is hot. The painting has to harden
up first.
Use of the stove:
Below is the procedure used for testing/approval of the stove. It is this
procedure that will lead to the best combustion for the given chimney.
Firewood amount and damper setting can be adjusted to the individual need
for heating and the draught in the concrete chimney.
Lighting and continuous firing at EN-testing
1. The ashpan must always be closed completely, also when you light the fire.
The damper/start-up device can be opened (the knob on the ashpan moved
To Next Page
Loading...
General