72 Connecting Handhelds and Transferring Files
Connecting Handhelds and Transferring Files
This chapter describes how to connect one TI-Nspire™CX II handheld to another, how
to connect handhelds to a computer and how to transfer files between them.
The TI-Nspire™ handhelds have a USB port that enables connectivity with another TI-
Nspire™ handheld or with a computer.
Connecting Handhelds
You can use USB cables to connect two TI-Nspire™ handhelds or to connect a TI-
Nspire™ handheld to a computer.
TI-Nspire™ handheld mini-USB cable to connect two
TI-Nspire™ handhelds.
TI-Nspire™ USB connection cable to connect the
handheld to a computer.
Connecting Two TI-Nspire™ Handhelds with the Mini-USB Cable
The USB port is located on the top of the TI-
Nspire™ CX II handheld on the right side when
holding the handheld with the screen facing you.
1. Firmly insert either end of the mini-USB cable into the USB port.
2. Insert the other end of the cable into the receiving handhelds’s USB port.
To Next Page
Need help?
General
