To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the Texecom Capture CA and is the answer not in the manual?
General| Brand | Texecom |
|---|---|
| Model | Capture CA |
| Category | Security Sensors |
| Language | English |
Instructions on how to open the motion detector device by unlocking the mechanism and sliding the front off.
Guidance on selecting the correct location and ensuring the field of view is free from obstructions and potential false alert causes.
Explains wiring methods, TEOL security, resistor selection via dip switches, and pre-power-up adjustments for calibration.
Details the default mode for optimal catch performance and false activation immunity, highlighting specific compliance standards.
Instructions on how to correctly close the motion detector device after installation and configuration.
Details the initial calibration period, thorough walk testing, and LED status indications for different states like warm-up, alarm, and fault.
Details specifications and coverage diagrams specific to the CAPTURE A20 model, including resistance and voltage readings.
Presents microwave coverage diagrams for the CAPTURE CA model at MIN, MID, and MAX settings.
Information on custom branding options for wall mount devices, including printed inserts and clear covers.
Details part numbers and screw/fixing requirements for optional wall and ceiling mount brackets.
Provides technical details including alarm system compliance, voltage, current, temperature, and weight for A20 and CA models.
Provides dimensions for both wall mount and ceiling mount configurations of the device.
Identifies Texecom Ltd as the supplier, including their address and country of manufacture.
Explains the WEEE Directive regarding product disposal and recycling in the European Union.
Recommends annual testing and details the warranty policy, including lifetime warranty and Texecom's liability limitations.
