Texecom CAPTURE D20-W User Manual

INS879EN-6 4/71
1.0 Quick installation
1.1 Opening the device
The devices are supplied in the unlocked position. If locked;
Use a flat bladed terminal driver and turn the locking mechanism ¼
turn anti-clockwise.
Slide the front down and towards you to remove.
For ceiling mount devices remove the facia by turning it anti-clockwise,
and then unlock as above.
Locking mechanism
Opening the device

Texecom CAPTURE D20-W Specifications

General

Brand	Texecom
Model	CAPTURE D20-W
Category	Security Sensors
Language	English