EasyManuals Logo
Home>Texecom>Security Sensors>CAPTURE D20-W

Texecom CAPTURE D20-W User Manual

Texecom CAPTURE D20-W
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
INS879EN-6 69/71
Current During Supervision
(Period)
18mA (40ms) 18mA (40ms)
Supervision Frequency (Per
Hour)
4 4
PSU Characteristics (Type C)
Capacity of Supplied Battery 1250mAH
Low Voltage Signal 2.85V
End of Life Voltage 2.20V
After the low battery value has been signalled the product will operate for a
minimum of 30 days with an average daily current draw of 21uA (22uA for the
D20-W and CD-W). The battery will have a remaining capacity of at least 27mAhrs
after low battery is signalled.
When replacing the battery in the product, care should be taken to only use a
battery with a similar or greater capacity.
5.0 Legal information
5.1 Supplier
Texecom Ltd, Haslingden, Lancashire, BB4 4PW, UK.
Made in England
5.2 WEEE Directive
2012/19/EU (WEEE Directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. To recycle, return

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texecom CAPTURE D20-W and is the answer not in the manual?

Texecom CAPTURE D20-W Specifications

General IconGeneral
BrandTexecom
ModelCAPTURE D20-W
CategorySecurity Sensors
LanguageEnglish

Related product manuals