INS352-5 2
2. Choosing a Location
Parallel
✓
1.0 - 1.4m
• Mounting height 1.0 - 1.4m (nominal 1.2m), measured to middle of unit.
• Mount perpendicular to ground.
• Try to avoid direct sunlight.
• Avoid pointing at swaying bushes/trees and
swaying clothes on a clothes line.
✗
✗
• Try to install the detector so its detection area is
terminated by building/fences etc. This will reduce
the effect of range variation caused by environmental
changes.
• In the detection area try to avoid reflective surfaces
such as standing water, swimming pools or polished
floors as this can cause the detectors range or coverage
to vary as reflected signals may be seen.
✗
To Next Page
Loading...
Need help?
General
