16
Maintenance
Note:
• Clean the dustbin and lters after each use.
• Use the cleaning tool to thoroughly clean the pre-lter when the indicator blinking red rapidly. To
maintain high performance, wash and dry the pre-lter monthly, replacing it every 6 months.
Wash and dry the HEPA lter every 3 months, replacing it every 12 months.
Dustbin and Mesh Filter
Press the dustbin release button to remove
the dustbin.
Clean with a damp cloth, taking care to prevent
water entering the appliance main body and battery.
Turn counter-clockwise to remove the lters. Clean the dustbin and mesh lter with a damp cloth.
Air dry completely before reinstalling.
①
②
③
④
After cleaning, insert the clean pre-lter into
the mesh lter properly and it clicks into
place. Install the clean lter and dustbin
back into the main body, then close the
dustbin ap.
Warning:
• Do not wash the dustbin as it contains a dust
sensor. If it comes into contact with water, please
dry it with a hair dryer.
5
1 2
3 4
Mesh lter Pre-lter
To Next Page
Loading...
Need help?
General
