TOHATSU 2.5 User Manual

@ Replacing the propeller and shear pin
(a) Pull out the split pin from the propeller boss and remove the propeller
from the shaft.
(b) Remove the shear pin from the shaft.
(c) Install a new shear pin.
A CAUTION
When removing the propeller, disconnect the plug cap from the spark
plug for safety.
Note:
(1) When removing the plug cap cover, take care not to drop it into the
water.
(2) Always carry a spare split pin and shear pin. When the spare has
been used, supply a new one. A damaged or worn split pin or
shear pin should be replaced with a new one.
27

TOHATSU 2.5 Specifications

General

Brand	TOHATSU
Model	2.5
Category	Outboard Motor
Language	English