3. Select the COM port that was assigned to your LINK 530 from the list and click OK.
At the bottom of the window you can find information about the operating system installed on
the LINK 530, the serial number of the LINK 530 and which COM Port number was assigned, as
well as the operating system that will be installed with this update.
If the version number of the firmware installed on your LINK 530 is lower than the one includ-
ed in the Firmware-Update Tool, continue with the next ystep. If it is up-to-date, disconnect
your LINK 530 and activate your LINK 530.
4. Select Start to initiate the firmware update installation process.
To Next Page
Loading...
Need help?
General
