PositioningtheSeat
g027249
Figure15
PositioningtheSteering
Wheel
Thesteeringwheelhas3positionsforoperationand
1full-upposition.Usethefull-uppositionforstepping
onandoffthemachineandgettingoutoftheseat.
Whenoperatingthemachine,positionthesteering
wheelwhereyouhavethebestcontrolofthemachine
andaremostcomfortable.
1.Pressyourfootontothesteering-columnrelease
lever.
2.Positionthesteeringwheeltothedesired
position(Figure16).
g027751
Figure16
AdjustingtheAnti-scalp
Rollers(for107cm(42-inch)
MowerDecks)
Wheneveryouchangetheheightofcut,itis
recommendedtoadjusttheheightoftheanti-scalp
rollers.
Note:Adjusttheanti-scalprollerssotherollersdo
nottouchthegroundinnormal,atmowingareas.
1.Disengagetheblade-controlswitch(PTO)and
ensurethattheparkingbrakeisengaged.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Adjusttheanti-scalprollersto1ofthefollowing
positions:
•Upperhole—usethispositionwiththemower
deckinthe63mm(2-1/2inches)andbelow
theheight-of-cutpositions(Figure17).
•Lowerhole—usethispositionwiththemower
deckinthe76mm(3inches)andabovethe
height-of-cutpositions(Figure17).
23