Toro ECx User Manual

Setting An Interval Schedule
Turn the control dial to the SET WATERING DAYS
position.
Check the
PROGRAMS switch setting. If necessary,
reposition the switch to select the desired program.
The current watering schedule will be displayed:
CAL for Calendar, Int for Interval or OFF.
• If CAL or OFF is displayed, press the +/ON or –/OFF
button to select Int, then continue at step
.
• If
Int is displayed, continue at step .
Press the
NEXT button. The current Interval number
(1–7) will begin flashing. The day of the week on
which the Interval will start will be shown.
To change the Interval number, press the
+/ON or
–/OFF button until the desired number is flashing.
Press the
NEXT button. The Interval start day will
begin flashing.
To change the Interval start day, press the
+/ON
button or the –/OFF button until the desired day is
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step .
When you have completed setting the Interval
schedule for each program (as needed) return the
control dial to the
AUTO/ON position.
9
2
7
6
5
4
4
4
3
2
1
18
9
5 7
4 6
3
5 73
2
PGM A
3
5
7
4
1
3
2
MO
6
MANUAL
START
AUTO / ON
SET TIME / DAY
SET ZONE
RUN TIMES
SEASON
ADJUST
OFF
RAIN
DELAY
SET
WATERING
DAYS
SET
PROGRAM
START
TIMES
ON
NEXT
OFF
PROGRAMS

Toro ECx Specifications

General

Brand	Toro
Model	ECx
Category	Lawn and Garden Equipment
Language	English