Timer Components
The following are brief descriptions of the ECx compo-
nents and display elements. Each of these items will be
explained in further detail within the appropriate pro-
gramming, operating and installation sections of this
guide.
1 - LCD Display
A -
“Start Time” symbol – Alarm clock is displayed
when setting the program start times.
B - Program start time identification numbers 1–4.
C - Main display of various time values and prompts.
D - Program A, B and C identifiers.
E - “Watering On” symbol – Water droplet indicates a
watering zone is running. Droplet flashes if water-
ing is paused.
F - “Watering Off” symbol – Water droplet with slash
indicates all watering activity is Off.
G - “Power Off” symbol – Displayed when 24 VAC is
disconnected and timer is on battery power only.
H - “Low Battery Voltage” symbol – Indicates low bat-
tery voltage (when transformer is disconnected).
I - Watering Zone identification numbers.
J - “Percent” symbol– Indicates the Season Adjust fea-
ture is in use.
K - Day of the week identifiers.
L - “Run Time” symbol – Hourglass is displayed when
setting the watering zone run times.
2 - Control Buttons
+/ON button – Increases the time display, scrolls for-
ward through the program information and selects
watering days.
–/OFF button – Decreases the time display, scrolls
backward through the program information and
removes watering days.
NEXT button – Advances to the next portion of pro-
gram information. Resumes watering if paused.
Advances through stations manually when watering.
MANUAL START button – Selects and starts manual
watering operations.
3 - Control Dial – Selects all timer programming and
operation controls (except Manual Start).
Control Dial Positions
AUTO/ON – Normal dial position for all automatic and
manual operations.
SET TIME/DAY – Enables clock time and day to be set.
SET WATERING DAYS – Enables watering day sched-
ules to be set and reviewed.
SET PROGRAM START TIMES – Enables program start
times to be set and reviewed.
SET ZONE RUN TIMES – Enables zone run time to be
set and reviewed.
(continued)
3
To Next Page
Loading...
Need help?
General
