Toro Greensmaster 3250-D User Manual

tothenegative(–)terminalofthebatteryand
securethemwiththeboltsandnuts(Figure6).
Slidetherubberbootoverthepositiveterminal
topreventapossibleshortfromoccurring.
WARNING
Incorrectbatterycableroutingcoulddamage
thetractorandcables,causingsparks.
Sparkscancausethebatterygassesto
explode,resultinginpersonalinjury.
•Alwaysdisconnectthenegative(black)
batterycablebeforedisconnectingthe
positive(red)cable.
•Alwaysconnectthepositive(red)battery
cablebeforeconnectingthenegative
(black)cable.
g005098
Figure6
1.Negative(-)
2.Positive(+)
3
InstallingtheRollBar
Partsneededforthisprocedure:
1Rollbar
4
Bolt(5/8x4-1/2inch)
4
Locknut(5/8inch)
Procedure
1.Positiontherollbarsothetopofthetubeis
curvedtowardthefrontofthemachine(Figure
7).
g019975
Figure7
1.Rollbar
3.Locknut(5/8inch)
2.Bolt(5/8x4-1/2inch)
2.Lowertherollbarontotheframe,aligningitwith
themountingholes(Figure7).
3.Secureeachsideoftherollbartotheframe
with2bolts(5/8x4-1/2inches)andlocknutsas
showninFigure7.
4.Torquethefastenersto183to223N∙m(135to
165ft-lb).
4
ReducingtheTirePressure
NoPartsRequired
Procedure
Thetiresareover-inatedatthefactoryforshipping
purposes.Reducethepressuretotheproperlevels
beforestartingthemachine.RefertoCheckingthe
TirePressure(page39).
12

Toro Greensmaster 3250-D Specifications

General

Brand	Toro
Model	Greensmaster 3250-D
Category	Lawn Mower
Language	English

Summary

Introduction

General Safety Information

Provides crucial safety guidelines for operation and use of the manual.

Understanding Manual Warnings

Explains the use of safety-alert symbols and warnings for hazard identification.

Safety

General Safety Precautions

Outlines essential safety rules for users to prevent injury or damage.

Decal Identification and Care

Explains the purpose and replacement of safety decals for hazard awareness.

Setup Procedures

Loose Parts Verification

Lists and describes parts required for initial machine setup.

Initial Assembly Steps

Covers mounting seat, roll bar, carrier frames, and cutting units.

System Preparation Steps

Includes battery activation, tire pressure, and ballast installation.

Final Setup Adjustments

Covers roller, oil cooler, CE kits, decals, and brake adjustments.

Product Overview

Controls Description

Identifies and explains the main machine controls and their functions.

Brake Burnishing Procedure

Refers to the procedure for breaking in new brakes.

Control Lever Functions

Throttle, Ignition, and Warning Lights

Explains throttle, ignition switch, and engine warning indicators.

Functional Control Lever Operation

Details the operation and traction selections of the functional control lever.

Steering Adjustment and Indicators

Describes steering arm adjustment and water temperature light.

Specifications

Attachments and Accessories

Information on approved add-ons to enhance machine capabilities.

Before Operation Safety

Crucial safety guidelines to follow before starting operation.

Fuel Safety Precautions

Safety rules for handling fuel, including storage and usage.

Fuel Specifications

Details recommended fuel types, octane rating, and tank capacity.

During Operation Safety

General Driving Safety

Safety rules for operating the machine in various conditions.

Rollover Protection System (ROPS)

Safety guidelines related to the use and maintenance of the ROPS.

Slope Operation Safety

Precautions and guidelines for operating the machine on slopes.

Starting the Engine

Starting Procedure

Step-by-step guide for starting the engine safely.

Post-Start Checks

Verifies engine and cutting unit operation after starting.

Safety-Interlock System Checks

Interlock System Functionality Testing

Details checks for traction pedal and function control interlocks.

Mowing the Green

Operator Presence and Mow Control Checks

Verifies operator presence and mow control interlocks.

Green Mowing Preparation

Steps before starting to mow a green.

Green Cutting Technique

Describes the cutting process and alignment for greens.

Cutting the Periphery and Finishing

After Operation Safety

General After Operation Rules

Safety guidelines for shutting down and securing the machine.

Towing Safety Precautions

Safety rules for towing the machine, including weight limits.

Inspecting and Cleaning after Mowing

Hauling the Machine

Towing the Machine

Maintenance

General Maintenance Warnings

Highlights crucial maintenance safety and warnings.

Maintenance Safety Guidelines

Rules to follow before performing any maintenance tasks.

Recommended Maintenance Schedule(s)

Daily Maintenance Checklist

Lubrication Procedures

Greasing the Machine

Details lubrication points, intervals, and types of grease.

Engine Maintenance

Engine Safety Rules

Safety instructions for working on or around the engine.

Servicing the Air Cleaner

Steps to clean or replace the air filter for engine performance.

Servicing the Engine Oil

How to check and change engine oil and filter.

Fuel System Maintenance

Draining Water from Fuel Filter

Procedure to remove water from the fuel filter.

Replacing the Fuel Filter

Inspecting Fuel Lines and Connections

Electrical System Maintenance

Electrical System Safety

Safety rules for performing electrical system maintenance.

Servicing the Battery

How to maintain the battery, including cleaning and checking levels.

Locating the Fuses

Identifies the location of the fuses within the electrical system.

Drive System Maintenance

Checking Tire Pressure

How to check and adjust tire pressure for optimal performance.

Checking Wheel Nut Torque

Instructions for torquing wheel nuts to specification.

Adjusting Transmission for Neutral

Correcting machine creep when the transmission is in neutral.

Adjusting Transport Speed

Adjusting Mowing Speed

Cooling System Maintenance

Cooling System Safety

Safety rules for handling hot coolant and the cooling system.

Cleaning Radiator Screen

Procedure for cleaning the radiator screen to prevent overheating.

Checking Engine-Coolant Level

How to check and maintain the engine coolant level.

Brake Maintenance

Burnishing the Brakes

Procedure for breaking in new brakes for optimal performance.

Adjusting the Brakes

How to adjust brake linkage for equal braking.

Belt Maintenance

Adjusting the Alternator Belt

Steps to tension the alternator belt for proper operation.

Controls System Maintenance

Adjusting Cutting Unit Lift/Drop

Fine-tuning the hydraulic lift/drop circuit for cutting units.

Hydraulic System Maintenance

Hydraulic System Safety

Safety rules for performing maintenance on the hydraulic system.

Servicing the Hydraulic Fluid

Information on fluid types, specifications, and oil cooler installation.

Checking Hydraulic-Fluid Level

Checking Hydraulic Lines and Hoses

Cutting Unit Maintenance

Blade Safety Precautions

Safety rules for handling blades and cutting units.

Checking Reel-to-Bedknife Contact

Verifying proper reel and bedknife alignment for cut quality.

Setting the Reel Speed

Adjusting reel speed for consistent cut quality.

Backlapping the Reels

Storage Instructions

The Toro Warranty

Warranty Conditions and Coverage

Details what is covered, not covered, and warranty period.

Obtaining Warranty Service

Instructions for seeking warranty repair and contacting support.

Owner Responsibilities

Owner's duties for required maintenance to maintain warranty validity.