EasyManua.ls Logo

Toro Titan 76501 User Manual

Toro Titan 76501
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Driving the Machine
CAUTION
Positioning one lever too far in front of the other causes the machine to spin very
rapidly. As a result, you may lose control of the machine, causing personal injury to
you and damage to the machine.
Slow down the machine before making sharp turns.
The drive wheels turn independently, powered by motors on each axle. You can turn 1 side
in reverse while you turn the other forward, causing the machine to spin rather than turn.
This greatly improves the machine maneuverability but may require some time for you to
adapt to how it moves.
1. Move the motion-control levers down to the center, unlocked position.
G426843s
Motion-control levers—PARK
position
Center, unlocked position
Forward
Reverse
Front of the machine
Operation: During Operation Page 4–12 3464-634 A

Table of Contents

Questions and Answers:

Toro Titan 76501 Specifications

General IconGeneral
Drive TypeHydrostatic
Mulching CapabilityYes
Bagging CapabilityOptional
Side Discharge CapabilityYes
Blade Tip Speed18, 000 fpm
Spindle MaterialCast Aluminum
Deck TypeFabricated
Cutting Width60 in (152 cm)
Cutting Height1.5 in
Drive SystemHydrostatic
Weight535 kg
Deck MaterialSteel
SeatHigh Back with Armrests
Tires (Front)13 x 6.5 inches
Warranty3 years limited

Related product manuals