Care and service
EN DE
page 46 / 117
Inboard Motor Activity 1000 h/annually Special intervals
Check for corrosion OTemperature sensor on gearbox
Check for tight fit O
Check hoses and hose connections/clips OCooling system
Replace cooling water pump O | every 1000 h
Drive train Visual, functional inspection O
i3 battery 30.5 kWh Activity 1000 h/annually Special intervals
Visual inspection of hose O
Open drain screw and clean if necessary O
Venting
Check attachment O
Check sea water filter and clean if necessary O
Replace cooling water pump O | every 1000 h
Visual inspection of hoses, hose connections
and clips
O
Visual inspection of sight glass (green) O
Check functioning (switch on manually) O
Battery cooling (optional)
Visual inspection of heat exchanger for corro-
sion (external)
X
Check clearance/play ODamping (optional)
Visual inspection O