OP7
OP8
LED Indication
The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's
status, as described below.
Red ON (solid) and Green OFF = The TV power cord is plugged in.
Green ON (solid) and Red ON = The On timer is operating.
OPT7 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) Enable mode that speaker volume will be set
in forced when turn ON the main power
Enable Disable
D6 (bit6) ~
D0 (bit0)
Forced speaker volume 0 ~ 100 [decimal] (Normal: 0)
Value above 100 is no effect.
OPT8 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) ~
D3 (bit3)
- (no use) - -
D2 (bit2) Enable mode that picture mode will be set in
forced when turn ON the main power
Enable
(Display the
language only)
Disable
D1 (bit1) ~
D0 (bit0)
Forced picture mode 0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)
LED Indication Condition Solution
1 Green is OFF;
Red blinks continuously at 0.5-
second intervals.
Abnormal operation Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
ADJUSTMENT [LCD Color Television] ASIA_EU
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.029\42C
To Next Page
Loading...
Need help?
General
