CAMILEO X-SPORTS
EN-13
User’s Manual
Remote LED status Operation
Blinking Red + Blue (alternatively) Simultaneous Video & Photo Mode
Blinking Red continuously Record a Video/ Simultaneous Video
& Photo
Blinking Blue continuously Taking Photos in Timelapse
Blinking Blue once (1 sec.) Taking a single Photo/ Continuous
Photo/ Photo Burst
Blinking White once Camera received operating signal
from Remote
Blinking Green Remote is charging
Stay solid Green Remote is fully charged
Waterproof Casing
NOTE
Please be aware that the camcorder itself is not waterproof at all. It is only waterproof
inside the waterproof casing.
How to put the camera into the waterproof casing:
1. Slide the open button and lift up the latch. Open the waterproof casing door.
2. Put the camera into the waterproof casing.
3. Close the waterproof casing door and bring the latch into position to hold
the door.
4. Lift down the latch to lock the door.
To take out the camera from the waterproof casing:
1. Slide the open button and lift up the latch.
2. Open the door.
3. Take out the camera.
Power ON, Record a Video, Power OFF
1. Press and hold the Power button for 2 seconds to start up the camera.
To Next Page
Loading...
Need help?
General
