CAMILEO X-SPORTS
EN-32
User’s Manual
Operating Environment Conditions
Operating temperature: 14° to 104° F (-10° to 40° C)
Operating humidity: 20% to 85% (no condensation allowed).
Firmware upgrade
Download the latest rmware from Toshiba website
(http://www.mytoshiba.com.au/support). Once it’s done, connect
the camera to your laptop USB port and copy the rmware (bin le) into the
root directory of the camera’s microSD™ card. Then disconnect the USB cable
and the camera will turn off. Restart the camera again. Camera will detect
the rmware le and run the rmware upgrade process automatically. During
this process, LCD will show “Firmware upgrade is processing…” and LED will
blink RED. Once it’s nished, camera will power off by itself. The camera is
upgraded now.
© 2014 Toshiba (Australia) Pty Limited. All rights reserved.
TOSHIBA reserves the right to make technical changes.
TOSHIBA assumes
no liability for damages incurred directly or indirectly from errors, omissions or
discrepancies between this product and the documentation.
To Next Page
Loading...
Need help?
General
