18
Starting setup
The STARTING SETUP function makes installing your TV/DVD easily. It leads
you the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
Press or to select “TV” or “CABLE”, then
press ENTER.
Press
or
to select “START”, then press
ENTER.
If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
1
2
3
Now the “AUTO CH MEMORY” starts.
After the starting setup is completed, the TV
channel appears on the screen.
Note:
If you press the CANCEL button in the process of
“AUTO CH MEMORY” you can do starting set up
function again.
4
Note:
The starting setup function will work only when you press the
POWER button for the first time.
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or to select your desired
language, then press ENTER.
ENTER
POWER
CH +
CH –
ENTER
CH +
CH –
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/ /
ENTER
><
CHANNEL PLAN
TV
CABLE
/ /
ENTER
><
ENTER
CH +
CH –
/ /
ENTER
><
AUTO SETUP
START
CANCEL
AUTO CH MEMORY
STOP : CANCEL
Basic setup
POWER
/
ENTER
CANCEL
5K30401B [E] (P13-23) 20/4/04, 15:2718
To Next Page
Loading...
Need help?
General
