18
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
Press or to select “TV” or “CABLE”, then
press ENTER.
Press
or to select “START”, then press
ENTER.
If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
1
2
3
Now the “AUTO CH MEMORY” starts.
After the starting setup is completed, the TV
channel appears on the screen.
Note:
If you press CANCEL in the process of “AUTO CH
MEMORY” you can do starting setup function again.
4
Note:
The starting setup function will work only when you press
POWER for the first time.
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or to select your desired
language, then press ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
//
ENTER
><
CHANNEL PLAN
TV
CABLE
//
ENTER><
//
ENTER
><
AUTO SETUP
START
CANCEL
AUTO CH MEMORY
STOP : CANCEL
Basic setup
POWER
/
ENTER
CANCEL
5S00201A [E] (P13-23) 4/1/05, 3:16 PM18
To Next Page
Loading...
Need help?
General
