23
TV operation
/ / /
MENU
Press or to select “TV/CABLE”.
1
2
Press MENU in the TV mode, then press or
to select option.
Press MENU repeatedly until the menu screen is
cleared.
4
Press or to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
Cable TV chart
The chart below is typical of many cable system channel
allocations.
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
////
MENU
CABLE
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
////
MENU
CABLE
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
////
MENU
TV
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows channels to
skip up or down to the next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be programmed into the unit’s
memory. In addition to normal VHF and UHF channels, this unit can receive up
to 113 Cable TV channels. To use this unit with an antenna, set the TV/CABLE
selection to the TV position. When shipped from the factory, this selection is in
the CABLE position.
0–9
To ADD/DELETE channels
Press or to select the “AUTO CH MEMORY”,
then press
.
The TV will begin memorizing all the channels
available in your area.
Automatic memory tuning
Press or to select “ADD/DELETE”, then
press
.
1
Press or to select “ADD” or “DELETE”,
whichever function you want to perform.
3
2
Select the desired channel to be added or
deleted using Direct
channel selection buttons
(0–9) or
/ .
5S00201A [E] (P13-23) 4/1/05, 3:16 PM23
To Next Page
Loading...
Need help?
General
