UNIT OPERATION
MANUAL OPERATION
PROCEDURE
DRY OPERATION
This operation eliminates moisture economically by operating the compressor, indoor and
outdoor fan motor intermittently, so that the room temperature is maintained at the set temperature.
1
2
3
4
5
6
ON/OFF button
Press this button and the AUTO operation is indicated.
• A receiving beep is heard.
• The green UNIT on lamp of the indoor unit display illuminates.
MODE button
Press this button to select the desired operation mode.
AUTO DRY COOL FAN HEAT
FAN SPEED button
Press this button to select the desired fan speed.
AUTO LOW MED HIGH
TEMP.( ) button
Press these buttons to set the desired temperature.
FLAP button
Press this button to control the desired air flow
direction.
ON/OFF button
Press this button and AUTO operation is indicated.
• A receiving beep is heard.
• The UNIT ON lamp is extinguished.
SLEEP
MODE FAN FLAP
CLOCK
EVERYDAY
HOUR MINUTE
RESERV.
RST TA
TIMER
ON OFF
CANCEL
A
A
TEMP.
ON/OFF
OWNER
,
S MANUAL - 14
햲
햷
햳
햵
햴
햶
To Next Page
Loading...
Need help?
General
