57
HL17 (E/F) Web 213:276
Chapter 7: Using the TV’s advanced features
Using the advanced audio settings
features
Using the SRS WOW
™
surround sound
feature
SRS WOW
™
is a special combination of SRS Labs audio
technologies (SRS 3D, SRS Focus, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your TV’s audio will sound
fuller, richer, and wider.
To adjust the WOW
™
settings:
1 Put the TV in STEREO mode (- “Selecting stereo/SAP
broadcasts” on page 45).
2 Press Y and open the Audio menu.
3 Highlight Advanced Audio Settings and press T.
4 Press b or B to highlight the WOW feature you want to
adjust, and then press C or c to adjust the item.
• WOW: SRS 3D — To turn the surround sound effect
On or Off.
Note: If the broadcast is monaural, the SRS 3D effect
will not work.
•
WOW: SRS Focus — To turn the vocal emphasis effect
On or Off.
• WOW: SRS TruBass — To select the desired bass
expansion level (Off, Low, or High).
5 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
Done
Advanced Audio Settings
WOW: SRS 3D
WOW: SRS Focus
WOW: SRS TruBass Low
Reset
Off
Off
32HL17_EN.book Page 57 Tuesday, April 24, 2007 11:06 AM
To Next Page
Loading...
Need help?
General