English
25
Picture controls continued
1/2
SET UP
Language English
Country UK
Auto tuning
OK
Manual tuning
OK
Antenna Amplifier On
AV connection
OK
MENU
Back
EXIT
Watch TV
If the signal being received by the television is too strong,
this may result in picture interference and/or a buzzing
sound. Setting Antenna Amplifier to Off reduces the
signal strength, and can help to remove the interference.
In the SET UP menu press
e
until Antenna
Amplifier is highlighted.
With
z
or
x
select either On or Off.
Antenna amplifier
1
2
When 3D Colour management is selected it allows the
‘Base colour adjustment’ feature to become available.
3D Colour management
In the PICTURE menu press
e
to select 3D Colour
management.
Press
z
or
x
to select On or Off.
1
2
Base colour adjustment
Hue Saturation Brightness
Red +2 +6 +4
Green 0 0 0
Blue 0 0 0
Yellow 0 0 0
Magenta 0 0 0
Cyan 0 0 0
Reset
OK
MENU
Back
EXIT
Watch TV
Press
f
and
e
to select an option, then
x
to
adjust the settings.
2
In the PICTURE menu press
e
to select
Base colour adjustment, then press OK.
1
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
Base colour adjustment
To return to the original factory settings select
Reset and press OK.
PICTURE
3D Colour management
On
Base colour adjustment
OK
MENU
Back
EXIT
Watch TV
2/2
PICTURE
3D Colour management
On
Base colour adjustment
OK
MENU
Back
EXIT
Watch TV
2/2
gpg
To Next Page
Loading...
Need help?
General