26
CONTROLS AND FEATURES
This feature resets all picture settings to the factory settings
except
Picture Mode
.
NOTE:
If any picture settings have not been changed,
Reset
is
not available.
a
In the
PICTURE
menu press
b
to select
Reset
and
press
Q
.
b
A confirmation message will appear. Press
C
or
c
to
select
Yes
and press
Q
.
When
3D Colour Management
is set to
On
it allows the ‘Base
Colour Adjustment’ feature to become available.
a
In the
PICTURE
menu press
b
to select
Advanced
Picture Settings
and press
Q
.
b
Press
b
to select
3D Colour Management
.
c
Press
C
or
c
to select
On
or
Off
, and then press
Q
.
The
Base Colour Adjustment
feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the
Advanced Picture Settings
menu press
b
to
select
Base Colour Adjustment
, and then press
Q
.
b
Press
B
or
b
to select an option, then press
c
to move
to the adjustment window.
c
Press
C
or
c
to select
Hue
,
Saturation
or
Brightness
, and then press
B
or
b
to adjust the
settings as required.
d
Press
Q
to return to the previous menu.
To return to the factory settings, select
Reset
and press
Q
.
Colour Temperature
increases the ‘warmth’ or ‘coolness’ of
the picture by increasing the red or blue tint.
a
In the
Advanced Picture Settings
menu press
b
to
select
Colour Temperature
and press
Q
.
b
Press
C
or
c
to select the
Colour Temperature
setting (0 (warm) – 10 (cool)).
c
Press
B
or
b
to select the option you want to adjust,
and then press
C
or
c
to adjust the settings.
d
Press
Q
to return to the previous menu.
To return the Colour Temperature settings to the
factory defaults, select
Reset
and press
Q
.
NOTE:
If
Picture Mode
is set to
AutoView
, you can adjust
Colour Temperature
only, and the range will be -5 to +5.
Reset
3D Colour Management
Base Colour Adjustment
0
10
Advanced Picture Settings
Base Colour Adjustment
3D Colour Management On
On
Auto Brightness Sensor Settings
Active Backlight Control
Colour Temperature
Black/White Level
Noise Reduction
Static Gamma
Hue
Saturation
Reset
Brightness
0Red
Green
Blue
Yellow
Magenta
Cyan
00
000
000
000
000
000
Base Colour Adjustment
Colour Temperature
Hue Saturation Brightness
0Red 0 -1
0
0
0
0
0
0
Colour Temperature
Red-Offset
Colour Temperature 5
Blue-Offset
Red-Gain
Green-Offset
Green-Gain
Reset
Blue-Gain
00GB_RV-LV685D_UK.book Page 26 Tuesday, September 1, 2009 10:58 AM
To Next Page
Loading...
Need help?
General