40
Advanced playback
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue*:
To control dynamic range to make
dialogue more intelligible.
• To use this enhancement on sounds
output from the BITSTREAM/PCM
jack, be sure to set “Audio Out
Select” to “PCM.”
50
* Effective only during playback of
Dolby Digital recorded discs.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
Press E.A.M.
The sound enhancement menu
appears.
2
1
To exit the audio enhancement selection
Press ENTER.
Alternatively leave the DVD video
player unattended for about 5
seconds after having made a
selection.
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select “Normal”.
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting “Dialogue” disables “Dynamic Range Control”
function
50
.
Select the sound enhancement by
pressing E.A.M. or / .
Each time you press the button, the sound
enhancement changes.
E.A.M.
ENTER
Manufactured under license from QSound Labs, Inc. U.S. patent
Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign
counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpander
TM
is a trademark of QSound Labs, Inc. All rights reserved.
DVD
VCD
CD
To Next Page
Loading...
Need help?
General
