Toshiba TOSVERT VF-S15 series Communication Function Manual

E6581911
- 10 -
3. Parameters
3.1. Command and Freq. Reference setting
Set up the inverter parameters as follows when command via CiA 402 profile. From CANopen network, the
drive parameters can be commanded directory. The latest commanded parameters are activated when same
run command / frequency reference command.
Refer to the below table and the figurer and the capture “2.4 Command & Setpoint selection (Local/Remote)”.
P No. Parameter function
Default
Value
Note
cmod
Command mode selection 1 3: CANopen communication
fmod
Frequency setting mode
selection 1
0 6: CANopen communication
cmod
Control terminal.
Op er ati on pa ne l.
Serial Comm. (FA00)
0
1
2
3
4
CANopen
Network option
CiA 402
State machine
Network option (FA06)
CANopen
®
(FA04)
6040
RS485
communication
Figure 1 Command source
fmod
0
･
･
4
5
6
7
CANopen
N etw or k op tion
FA 01(Hz)
FA13(min
-
1
)
FA 05(Hz)
6042
(
min
-
1
)
FA 07(Hz)
C906(min
-
1
)
RS485
communication
Figure 2 Frequency reference command source

Toshiba TOSVERT VF-S15 series Specifications

General

Brand	Toshiba
Model	TOSVERT VF-S15 series
Category	Inverter
Language	English