To turn the warm water temperature and toilet seat temperature "OFF"
●The "Drying" cannot be turned "OFF".
*1
Temperature Adjustment
Toilet Seat, Warm Water, Drying
*1
"High"
Lit
"Medium"
Lit
"Low"
Lit
"OFF"
OFF
"High"
Lit
"Medium"
Lit
"Low"
Lit
"OFF"
OFF
(
All
LED's
)
Lit
OFF
<Seat>
<Water>
<Water>
<Seat>
The setting changes each time the button is pressed once
The setting changes each time the button is pressed once
1
• The current temperature level appears.
The "Drying" cannot be turned "OFF".
*1
Adjusting the temperature
Three different temperature levels (High, Medium, Low) and "OFF" setting can be selected.
2
Warm water temperature button
(When you want to adjust the warm water temperature)
Drying air temperature button
*1
(When you want to adjust the drying air temperature)
Toilet seat temperature button
(When you want to adjust the toilet seat temperature)
Displaying the temperature level of the pressed button
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off, but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 1.
<Settings complete>
<Settings complete>
●
When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.
➞
Is the "Energy saver" set to "ON"? (Pages 20, 21)
When the seat temperature and the warm water
temperature are turned "OFF"
Choose and press the button of the temperature that you want to set
from the
, ,
*1
.
Press the button selected in step
1
repeatedly until a desired
temperature level illuminates.
1
• The current temperature level appears.
2
Select a temperature button you want to turn "OFF"
from
, and press it.
Press the button selected in step
1
repeatedly until the temperature
level is set to "OFF".
When the seat temperature and the warm water
temperature are set
*1 Except SW3004
<The drawing is T1SW3014>
18 19
Operation
To Next Page
Loading...
Need help?
General
