’06_SEQUOIA_U (L/O 0508)
439
Initial adjustment of the tire pressure
warning system is necessary after you
have replaced your wheels. See “Tire
pressure warning system” on page 198
in Section 1−7.
# When installing aluminum wheels,
check that the wheel nuts are tight
after driving your vehicle the first 1600
km (1000 miles).
# If you have rotated, repaired or
changed your tires, check that the
wheel nuts are still tight after driving
1600 km (1000 miles).
# When using tire chains, be careful not
to damage the aluminum wheels.
# Use only Toyota wheel nuts and
wrench designed for your aluminum
wheels.
# When balancing your wheels, use only
Toyota balance weights or equivalent
and a plastic or rubber hammer.
# As with any wheel, periodically check
your aluminum wheels for damage. If
damaged, replace immediately.
Aluminum wheel precautions
To Next Page
Loading...
Need help?
General
