Toyota 4500 EL User Manual

Removing the Bobbin Case
(1) Raise
the needle
to its
highest
position
by pushing
the
lower
thread
pick-up button.
(2) Open
the shuttle
cover and
take
out
the
bobbin
case,
holding
the
hinged latch
A of the
bobbin case.
(3)
Remove
the bobbin
with factory-
wound thread.
Threading the Lower Thread
(1)
Lead the thread
through
the slit
B. and
underneath
the
tension
spring c, then through the coiled
thread
guide
D.
_ > M (2) Leave a thread end about 10cm
(4") long from
the bobbin.
Inserting the Bobbin Case
(1) Make sure that the needle is
raised above the needle plate.
(2) Push the bobbin case onto the
rotary hook until it fits well, hold-
ing
the latch
of
the bobbin
case
A~
s
with your thumb
and
index finger.
1. ~~~~~~~

Toyota 4500 EL Specifications

General

Brand	Toyota
Model	4500 EL
Category	Sewing Machine
Language	English