Toyota 4500 EL User Manual

Zipper Sewing (in lapped seam)
Foot. Zipper foot
By using the special
zipper foot with
It
the sliding adjuster, zipper sewing can r
be
easily done
without
turning
the
material.
(1) With right
sides together, tack
0.3cm (1ll)
along seam line of the opening.
(2) Open the
tacked seam and pull
out
the lower material
0.3cm(
1/8").
Place the folded edge over the
right side of the zipper and tack
over it.
opening
(3)
Loosen
the
screw
(KA
and
slide
the
foot so that the needle comes
into position B.Tighten the screw.
(4)
Sew
carefully,
guiding
the
material
.M2U1E
so that the left side teeth of the
zipper are parallel
with the right
edge of the foot.
Turn the upper
material to the
right side.
(5) Loosen the
screw 'A~ and slide
the
foot so that the
needle comes
into position 8
Tighten
the screw and
sew on.
Remove the tacking
stitches.
28

Toyota 4500 EL Specifications

General

Brand	Toyota
Model	4500 EL
Category	Sewing Machine
Language	English