q12040
4.
Take out the discharged battery and
put in a new battery with the positive
side up.
NOTICE
Do
not
bend
the
terminals.
5.
Install the module lid and then install
the module into the key flame. Close
the cover.
After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.
NOTICE
•
Make
sure
the
positive
side
and
negative
side
of
the
battery
are
faced
correctly.
•
Do
not
replace
the
battery
with
wet
hands.
Water
may
cause
unexpected
rust.
• Do
not
touch
or
move
any
compo-
nents
inside
the
transmitter,
or
it
may
interfere
with
proper
operation.
•
Be
careful
not
to
bend
the
electrode
of
the
battery
insertion
and
that
dust
or
oils
do
not
adhere
to
the
case.
•
Close
the
cover
securely.
Side
doors-
-Front
doors
q12042
LOCKING AND UNLOCKING WITH
KEY
Insert
the
key
into
the
keyhole
and
turn
it.
To
lock: Turn the key forward.
To
unlock: Turn the key backward.
All the side doors and back door lock arid
unlock simultaneously with the front doors.
17
To Next Page
Need help?
General
