©2020 TP-Link
7106508964 REV1.1.0
Plug the extender into a power outlet next to your router.
Wait until its Power LED turns solid on.
Power On
Relocate
3
Quick Installation Guide
Range Extender
RE365
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the
same as your host router.
Tip: For more intuitive location assistant, access extender settings via the Tether app and go to
Tools > Location Assistant.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network
to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support/download.
1
Next to
Solid On
Router Devices
Halfway
Blue: Suitable location
Red: Too far from router
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Set Up
1. Get the up-to-date Tether app from the
Apple App Store or Google Play, or simply
scan the QR code.
Tether
Scan for Tether
or
For more details, please refer to the user guide at
https://www.tp-link.com/support/download.
1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender_2.4GHz
or TP-Link_Extender_5GHz.
2. Visit http://tplinkrepeater.net or
http://192.168.0.254 in a web browser.
Create a password to log in.
3. Follow web instructions to complete the setup.
Extended Network Names:
Same as your router
Passwords:
Same as your router
Via a Web Browser
Via the WPS Button
More Setup Methods
1. Press the WPS button on your router.
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The LED should
change from blinking to solid on, indicating
successful connection.
3. If the extender connects to a dual-band router,
repeat steps 1 and 2 to connect to the other
band.
2. Launch the Tether app and log in with your
TP-Link ID. If you don’t have an account,
create one first.
Welcome to Tether
Log In
TP-Link ID (Email)
Sign Up Forgot Password?
Password
2
Note: If you cannot find your device, please refer to
FAQ > Q1.
Note: If the LED does not turn solid on, please refer to
FAQ > Q2.
4. Follow app instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
3. Tap the button and select Range Extender.
My Devices
No devices found.
Choose your device type
Archer AX11000
Archer C5400X
Range Extender
Router
Solid On
Setup with videos
Scan the QR code, or visit
https://www.tp-link.com/download/RE365.html
Note: RE365 (EU version) is used for demonstration in this guide. Images may dier from actual products.
Via the Tether App
To Next Page
Need help?
General
Weight and Dimensions
