Installation Guide
TL-R470T+ / TL-R600VPN
LED Explanation
Package List
Router
Connection
Conguration
Installation Guide
Power Adapter
Ethernet Cable
TL-R600VPN
7106507860 REV6.0.1
1
Modem
Internet
Connect the WAN port of the
router to the cable or the DSL
modem with an Ethernet cable.
Connect the LAN port of the
router to the computer with
an Ethernet cable.
PC
2
Connect the DC power socket on
the router to an electrical outlet
with the power adapter provided.
3
On: Power on
O:
Power o
Power
Flashing: System running normally
On/O:
System running abnormally
System
Link/Act
For simplicity, we take TL-R600VPN as an example throughout this Guide.
©2017 TP-Link
3. Create a username and a password for subsequent login attempts.
2. Open a web browser and type the default management address
http://192.168.0.1 in the address eld of the browser, then press the
Enter key.
1. Connect a PC to a LAN port of the router with an RJ45 cable properly. If
your computer is congured with a xed IP, change it to "Obtain an IP
address automatically".
On: There is a device connected to the
port but not active.
O: There is no device connected to
the corresponding port.
Flashing: Transmitting or receiving data