TP-Link TL-R470T+ Quick Installation Guide

Physical Description
1
Quick Installation Guide
Load Balance Broadband Router
MODEL NO. TL-R470T+
7106504439 REV3.0.0
Package Contents
QIG
Load Balance Broadband Router
MODEL NO.
TL-R470T+
Resource CD
Ethernet Cable
TL-R470T+
Hardware Connection
2
Connect the WAN port of the router to the cable or DSL
modem via Ethernet cable.
• Front Panel
• Back Panel
• LED Descriptions
SYS
PWR
Name
Status
WAN, LAN
Indication
On (Green)
Flashing (Green)
The router has a hardware error
The router works properly
3
Internet Protocol Select the “Internet Protocol (TCP/IP) ” ”/“
Version 4 (TCP/IPv4)” and click the “
Properties”.
2
2
3
3
Select “Obtain an IP address automatically ” and “Obtain
server address automatically ”. Then click “OK”.
For Windows XP/2000 For Windows 7/Vista
For Windows XP/2000 For Windows 7/Vista
Click “Start” “Control Panel”
For Windows XP/2000:
1
1
“Network
and Internet Connections” “Network Connections”, and
.
Click “Start”For Windows Vista/7: “Control Panel”
Connect the AC power cord to the AC power socket on the
router, and the other end into an electrical outlet. The router
will work automatically and the LED will display as the LED
Descriptions shown.
Connect a LAN port of the router to the computer by an
Ethernet cable.
The router is powered on
“
View
network status and tasks”.
For Windows Vista For Windows 7
Click “
View Status ” Click “ Local Area Connection ”
then find
“Local Area Connection ” icon and click it. Then click
Power Cord
Here we take the ADSL modem
Internet
1
2
3
“Properties”.
The provided power cord may be different due to local
On
(Green/Yellow)
There is a device linked to the corresponding port but not active (Green indicates the
corresponding port is working as a LAN port, and yellow indicates WAN port)
Flashing
(Green/Yellow)
The corresponding port is transmitting or receiving data (Green indicates the
corresponding port is working as a LAN port, and yellow indicates WAN port)
There is no device linked to the corresponding port
For Windows XP/2000
DNS
TL-R470T+
TD-8816
from TP-LINK as an example.
Off
On/Off
Off
The router is powered off

TP-Link TL-R470T+ Specifications

General

Full duplex	No
Static route	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Concurrent connections	10000
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DNS
Ethernet LAN (RJ-45) ports	5
VPN support	PPTP/L2TP/IP Sec
Security algorithms	HTTPS
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	1.56 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Flash memory	4 MB
Certification	CE, FCC, RoHS
Internal memory	64 MB
Internal memory type	DRAM
Mac operating systems supported	macOS
Windows operating systems supported	Windows 7, Windows 8, Windows Vista, Windows XP
Product color	Black
LED indicators	LAN, Power, System, WAN, WLAN
Package depth	254 mm
Package width	190 mm
Package height	60 mm
Package weight	630 g
Cables included	AC, LAN (RJ-45)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	126 mm
Width	209 mm
Height	26 mm